| Home | |||
| Products | |||
| Slink-e | |||
| CDJ | |||
| Download | |||
| Support | |||
| Help Library | |||
| FAQ | |||
| Groups | |||
| Technical | |||
| Xantech | |||
| Master/Slave | |||
| Schematic | |||
| Contact Us | |||
| Legal | |||
| | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
Slink-e / CDJ Discussion Archive #1
Re: Slink-e software
Posted By: Colby Boles <cboles@s...> In Response To: Slink-e software (Sean McGrath)
Date: Saturday, 25 July 1998, at 4:06 p.m.
> I have 6 serial ports, only 1 to 4 are supported.
I'll add as many ports as you like if you can wait a day or two until I release more software
> C: disk and specific paths are assumed, I use other letters. This is not just > an NT issue; win 95 can
> use other disk letters too. I had to install on C: to make things work. On > other letters, code crashed
> because of builtin assumptions.
What software / files did this occur with? There are no built in assumptions as far as I can remember. I run my SW on E: with no problems. I only use NT, so don't worry about any NT compatability issues.
> More generally, I would like software that is platform independent and > based on open standards. I
> am willing and able to work towards that goal. What other interest is > there?
This is definitely possible. The lower lever classes are not very MFC specific. The two exceptions are the serial port setup and the use of the CString class. I'd like to switch from CString to a STL string type, but I haven't had the time.
| | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
Slink-e / CDJ Discussion Archive #1 is maintained by slinke-bbs-owner@nirvis.com with WebBBS 3.21.