Slink-e / CDJ Discussion Archive #11
Re: IR expansion port
Posted By: Todd Mathews <todd@m...> In Response To: IR expansion port (Reuben Herfindahl)
In Response To: IR expansion port (Reuben Herfindahl)
No, but it's not really needed. It hangs in the air once plugged into the Slink-e. You can also use a DB25 cable to locate it a short (key being short; the shorter the DB25 cable the better) elsewhere if needed.
I've actually been toying with the idea of building an external unit with activity lights to make it easier to see what is going on and for testing use. This would also allow the mod to flip all the connector pins so that standard phone cables could be used instead of straight thru cables.
Now if only the Slink-e itself had the IR receiver and status light on the same side of the case! It's a pain to check the status light since they are on opposite ends.