| Home | |||
| Products | |||
| Slink-e | |||
| CDJ | |||
| Download | |||
| Support | |||
| Help Library | |||
| FAQ | |||
| Groups | |||
| Technical | |||
| Xantech | |||
| Master/Slave | |||
| Schematic | |||
| Contact Us | |||
| Legal | |||
| | Read Responses | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
Slink-e / CDJ Discussion Archive #6
Re: Anothe DVP-CX850 question
Posted By: Barry Gordon <bvgordon@d...> In Response To: Re: Anothe DVP-CX850 question (Jim Bercik)
Date: 12/11/99 8:08am
I use the following IR sequence, and it seems to work most of the time. These are from a VB program but I think you will get the drift.
To select a slot:
SendDVDCmnd "DVD.FolderAll"
delay 6000
slot = Format(DVDDB(i).slot, "0")
For j = 1 To Len(slot)
SendDVDCmnd "DVD.0" + Mid$(slot, j, 1)
delay 750
Next j
SendDVDCmnd "DVD.Enter"
delay 6000
SendDVDCmnd "DVD.Enter"
To start up the player the following sequence is used:
SendDVDCmnd "DVD.Poweron"
delay 1000
SendDVDCmnd "DVD.EasyPlay"
delay 6000
SendDVDCmnd "DVD.Stop"
delay 2000
SendDVDCmnd "DVD.Stop"
delay 2000
SendDVDCmnd "DVD.Stop"
Delays are in miliseconds, SendDVDcmnd send out the obvious IRcode. I do not have a disk in slot 1, but I am not sure that matters. I think if I didn't issue the Stop's it would play the disk in slot 2, I have been too busy to try it with a disk in slot 1. Timings could possibly be shortened, but I vacilate between 2 schools of thougt: "If it ain't broke, dont fix it", and "anal retentive personality".
Responses To This Message
- Re: Anothe DVP-CX850 question - Barry Dacks - 12/11/99 9:22am
| | Read Responses | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
Slink-e / CDJ Discussion Archive #6 is maintained by slinke-bbs-owner@nirvis.com with WebBBS 3.21.