| Read Responses | Return to Index | Read Prev Msg | Read Next Msg |

Slink-e / CDJ Discussion Archive #8

Slink problem

Posted By: Tim Allman <allman309@y...>
Date: 4/26/00 12:45am

I have an Slink 1.0 that has been running for quite a while with no problems. I recently installed the latest version of CDJ and now can't get it to recognize the cd player (sony cdxp255). It's NOT the new software version because I went to a much older version and had the same problem. The log shows data from the player so I know the communications is working. I can receive data from the player ok.(door open, player ready etc.) If I send manual commands from the slinke window the player will respond. (play,stop,power on/off etc. all do what they should) I must have screwed up a device file setting or something but can't figure out what the problem is. The only device set up is 'common'. Even though the player communicates it does not show up in the player window. The com port shows ok but the player does not show up. Anyone have any suggestions? Thanks.

Responses To This Message

| Read Responses | Return to Index | Read Prev Msg | Read Next Msg |

Password:

Slink-e / CDJ Discussion Archive #8 is maintained by slinke-bbs-owner@nirvis.com with WebBBS 3.21.