| Return to Index | Read Prev Msg | Read Next Msg |

Slink-e / CDJ Discussion Archive #1

Re: SLinke IR port loop test failed!

Posted By: June <jxie@p...>
Date: Tuesday, 29 September 1998, at 11:26 a.m.

In Response To: Re: SLinke IR port loop test failed! (Colby Boles)

Thank you, Colby.

>The Slink-e SHOULD be functional since the main unit and IR transmitter are >tested before shipping. It sounds like the Slink-e is functioning, but the IR >transmitter is not working for some reason. Lets start from some basic >questions and go from there:

>Do you have the IR transmitter plugged in via the modular phone cable (or 1/8" >mono cable in older versions)?

Yes, I have the IR transmitter plugged in via the 1/8" mono plug cable. The mono plug cable was shipped together with Slinke. And I point the transmitter to the receiver during the test.

>Does the the Slink-e light flash orange when you attempt to send IR?

The light was flashing but not continuously like the case when I held down a remote control button. The light flashes every 1/2 second to 1 second during the loop test.

Jun

| Return to Index | Read Prev Msg | Read Next Msg |

Password:

Slink-e / CDJ Discussion Archive #1 is maintained by slinke-bbs-owner@nirvis.com with WebBBS 3.21.