| Return to Index | Read Prev Msg | Read Next Msg |

Slink-e / CDJ Discussion Archive #3

Re: Paralell port on slinke2

Posted By: Richard Malcolm-Smith <richard.ms@i...>
Date: 1/25/1999 11:46p.m.

In Response To: Re: Paralell port on slinke2 (Colby Boles)

Sweet.. works great now.

Im intending to use the paralell port on the slinke to interface with a couple of motion sensors around the house and a video capture card (with CCD or CMOS cameras) to snap pictures of any visitors that we may have. I have got some old sensor lights that were installed at the place where the sensor head is detached from a small box with the capacitive power supply and triac in it. There are three wires between the 2 - 5v power, ground, and a trigger that goes low to make the lights come on. I have left the sensor set to "test" so that it goes during the day, and only triggers for a couple of seconds. I will take photos when I get a camera for a while.

| Return to Index | Read Prev Msg | Read Next Msg |


Slink-e / CDJ Discussion Archive #3 is maintained by slinke-bbs-owner@nirvis.com with WebBBS 3.21.