[slinkelist] Trying to understand cross-fading requirements

Ken Geoffrion kgeoffrion@hotmail.com
Wed, 05 Jan 2000 11:48:12 PST


I should have mentioned that the complementary commad is cdj:awaken.

----Original Message Follows----
From: "Ken Geoffrion" <kgeoffrion@hotmail.com>
To: GeorgeT@concur.com
CC: slinkelist@nirvis.com
Subject: RE: [slinkelist] Trying to understand cross-fading requirements
Date: Wed, 05 Jan 2000 11:12:39 PST

You simply issue the command: cdj:sleep  There is a section in the help file
called "CDJ Automation Commands and Responses" that describes this and lots
of other neat control features.


----Original Message Follows----
From: George Tang <GeorgeT@concur.com>
To: 'Ken Geoffrion' <kgeoffrion@hotmail.com>, "'tedsmith@microsoft.com'"
<tedsmith@microsoft.com>
CC: "'slinkelist@nirvis.com'" <slinkelist@nirvis.com>
Subject: RE: [slinkelist] Trying to understand cross-fading requirements
Date: Wed, 5 Jan 2000 10:58:31 -0800

That's interesting.  As I understand it, CDJ will always keep the CD Players
on until CDJ closes.  How can you shutdown the CD Players while CDJ is still
running?

George

-----Original Message-----
From: slinkelist-admin@nirvis.com [mailto:slinkelist-admin@nirvis.com]On
Behalf Of Ken Geoffrion
Sent: Wednesday, January 05, 2000 10:15 AM
To: tedsmith@microsoft.com
Cc: slinkelist@nirvis.com
Subject: RE: [slinkelist] Trying to understand cross-fading requirements


Ted, et al.

Just a little more FWIW stuff:

You just reminded me that once in awhile my 350 doesn't power down -- the
260 slave always does.  The 350 will sometimes power the 260 back on, if I
try to turn the 260 off manually, but I seldom use the manual controls on
the players.

I always leave my computer and CDJ running.  I have CDJ macros driven mostly

by IR and X10 events to control my a/v equipment.  For instance when it
receives a VCR or DVD power on command, I issue a Sleep command to shutdown
the CD players, switch a/v inputs, power up the tv, etc.  These macros work
almost flawlessly.  Once in a great while the 350 doesn't shut off.

Ken


----Original Message Follows----
From: Ted Smith <tedsmith@microsoft.com>
To: slinkelist@nirvis.com
Subject: RE: [slinkelist] Trying to understand cross-fading requirements
Date: Wed, 5 Jan 2000 08:53:33 -0800

Howdy

FWIW

I've had great success with my 240 controlling both a 240 and a 225 (e.g. I
don't remember ever noticing any problems at all), but when my 300 controls
a 240 now and then weird things happen, e.g. I can't get the slave to play
either from CDJ or with it's buttons or with the masters buttons (with mega
control), also at times when CDJ closes the 300's slave is the only jukebox
which doesn't power down.

-Ted

-----Original Message-----
From: AndyStein@aol.com [mailto:AndyStein@aol.com]
Sent: Tuesday, January 04, 2000 8:30 PM
To: slinkelist@nirvis.com
Subject: Re: [slinkelist] Trying to understand cross-fading requirements


      What players are you using? When I attempt to use CDJ to run my
players
in master-slave mode (a 270 controlling a 250 and a 90ES controlling a 225),

the master player overrides any selection I make on the slave with CDJ.
About one per cent of the time, I manage to play a track from a slave player

with CDJ, but I cannot explain why it works.  It seems random.

      David and Colby, is there a chance that you might build a few of the
circuits you have posted on your site? I would like to control three pairs
of
Sony players from Slink-e and CDJ, so, from what I understand, the circuit
needs a slight modification.

      Thank you.


      Andrew


In a message dated 1/4/00 1:09:20 PM Pacific Standard Time,
Dave.Hoen@emulex.com writes:

<< Subj:     RE: [slinkelist] Trying to understand cross-fading requirements
   Date:  1/4/00 1:09:20 PM Pacific Standard Time
   From:  Dave.Hoen@emulex.com (Hoen, Dave)
   Sender:    slinkelist-admin@nirvis.com
   To:    aue@nirvis.com ('David Aue')
   CC:    slinkelist@nirvis.com (slinkelist@nirvis.com)

   I've had my two players in master/slave for over a year, and you're
right,
it isn't 100% reliable, but it is 99% reliable.  Now that I have a DXS, I am

thinking about implementing the s-link switching circuit suggested by Colby
(and documented on the Nirvis website
http://www.nirvis.com/masterslave.htm).
   Will this give me the additional 1% reliability?  Have any other of you
Slink-e Weenies had good success with the s-link switching circuit?

   Thanks,
   Dave Hoen
   dave.hoen@emulex.com

   ----------
   From:  David Aue
   Sent:  Tuesday, January 04, 2000 12:09 PM
   To:  Ken Geoffrion
   Cc:  stephenkorow@decisionresearch.com; slinkelist@nirvis.com
   Subject:  Re: [slinkelist] Trying to understand cross-fading requirements

   Unfortunately CDJ will not operate reliably with the players in a
   master/slave configuration.

   David

...


_______________________________________________
slinkelist maillist  -  slinkelist@nirvis.com
http://www.nirvis.com/mailman/listinfo/slinkelist

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com



_______________________________________________
slinkelist maillist  -  slinkelist@nirvis.com
http://www.nirvis.com/mailman/listinfo/slinkelist


_______________________________________________
slinkelist maillist  -  slinkelist@nirvis.com
http://www.nirvis.com/mailman/listinfo/slinkelist

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com



_______________________________________________
slinkelist maillist  -  slinkelist@nirvis.com
http://www.nirvis.com/mailman/listinfo/slinkelist

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com