[slinkelist] Re: Digital Audio Reciever

David Morgenlender dmorgen@alum.mit.edu
Sat, 18 Nov 2000 15:36:29 -0500


On Sat, 18 Nov 2000 14:47:30 -0500, you wrote:

>I use two devices from Sonance: LS-1 takes a stereo line out from your
>receiver at the SLINK-E end and turns it into a balance Line Out. You =
then
>use a shielded 4 conductor wire to the area you have your second =
receiver.
>The run can be at least 500 ft if needed. At the remote end you use =
their
>LR-1 which converts the signal back to RCA line out to your second =
receiver.
>Then if you want to listen to the CDJ/SLINK-E program, just select that
>input on the second receiver. No signal loss that I can discern. You can=
 use
>up to 3 LR-1 (receivers) for each LS-1 (Sender) daisy chained to extend =
the
>line signal to other remote receivers/amps.

Thanks for the suggestion.  I just looked this up on the web.  I found =
info
about the product, but no prices.  This is all preliminary, but a rough =
cost
estimate wouldn't hurt any <g>!  Do you know offhand about how much they =
& the
cable cost?

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D
Dave Morgenlender
e-mail: dmorgen@alum.mit.edu
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D